Description
Ligne de collage Italpresse 5 x 8 pieds haut et bas 2001
Collage automatique 5 x 8 pieds.
- table ciseaux
- convoyeur de panneaux
- Brosse de nettoyage 62 pouces
- Applicateur de colle 62 pouces
- Convoyeur a disque
- Presse trought feed a chaleur plateau de 1600 x 2500 mm ouverture maximum de 140 mm 700 tonnes.
- Convoyeur de sortie.
2001 Italpress Strom/S Press
Comes with a transfomer to 600V for operation in Canada
#1 – Pusher model SP-160
-Pneumatic pusher for automatic feeding
-Automatic raising of pusher for loading bundles
-Arm width: 63″ (1600mm)
-Arm length: 98″ (2500mm)
-Maximum arm travel: 23″ (600mm)
#2 – Lifting table model TE/16-25/3000/R
-Hydraulic table
-Table width: 63″ (1600mm)
-Table length: 98″ (2500mm)
-Load: 3000 kg (6,600 lbs)
-Pedal controls for manual operation
-Photocell controlled positioning
-Safety device on four sides
-One cylinder
-Idle rollers on the table surface
#3 – Brushing machine model B/160
-Maximum working width: 63″ (1600mm)
-Maximum working thickness: 3 1/4″ (80mm)
-Feed speed: 24-120 FPM (8-40 MPM)
-Two (2) rollers 180mm diameter
-Feed rollers diameter: 120mm
-Control panel thickness with hand wheel
-Dust collection hoods above and below
#4 – Glue coating machine model R4-160
-Working width: 63″ (1600mm)
-Maximum working thickness: 4″ (100mm
-Feed speed: 60 FPM (20 MPM)
-Two coater rollers, diameter 210mm
-Two doctor rollers, diameter 180mm
-Rubber thickness on application rollers 13mm (1/2″)
-Corrosion resistant rollers
-Panel thickness control with hand wheel with indicator and scale
-Adhesive thickness control with hand wheel
-Automatic cleaning of rollers
-Tracks and wheels to move the machine during washing
#5 – Motorized disk roller conveyor model VDM16-25
-Minimum contact disks
-Wdith: 63″ (1600mm)
-Length: 98″ 2500mm)
-Bottom plate in zinc-plated sheet with flow valve
-Motor: 0.5 HP
-Photocell
-Double carrier trolley dimensions 2500 x 1600mm
#6 – Automatic sandwich composer model CA/16-30
-Width: 63″ (1600mm)
-Length: 118″ (3000mm)
-Feed speed: 100 FPM (30 MPM)
-Series of rollers with steel discs, diameter 58mm (2.3″)
-Motor: 1 HP
-Panel stop bar for when the rollers are positioning back to start point
-Two (2) photocells to control the advancement of the carpet
-One (1) photocell to control the advancement of the rollers
#7 – Automatic press model STORM/S/16-26/5
-Length: 102″ (2600 mm)
-Width: 63″ (1600mm)
-Daylight between platens 140mm
-Loading side: 63″ (1600mm)
-Movement from top to bottom
-Solid steel platens drilled to full thickness
-Diathermic oil heating with electric boiler, 36 kW
-Specific pressure to 80% of the surface, 70psi
-Six (6) pushing cylinders, diameter 100mm
-Two (2) displacement cylinders with 1450mm travel
-Speed of the conveyor belt in press: 108FPM (33MPM)
-Belt control with self-braking motor
-Motor power conveyor feed: 1.1 kW
-Torsion bars to avoid platen twisting
7.1 – Flatness control which, in addition to the mechanical group with rack and pinions, guarantees the constant control of the flatness of the mobile platform to avoid any problems due to possible parallel movements
7.2 – Electro-pneumatic snap device to snap the upper mylar belt at each opening of the press (at the end of the pressing cycle) to guarantee the detachment of the pressed panels
7.3 – Blowers on the lower tray to form an air cushion between the tray and the transport mylar mat, to facilitate the transport by reducing friction and guaranteeing a greater life of the mat
7.4 – Collectors for heating, to connect all oil emissions and outlets
#8 – Outfeed conveyor with idle rollers, model SRF/16-30
-Width: 63″ (1600mm)
-Length: 118″ (3000mm)
#9 – Control panel, contains all electrical and PLC programmable electronic logic electrical for automatic command and control of the entire line
-Meets CE Norms
1700