scie a panneaux lame multiple

Description

Scie à panneaux multiple Homag ISL

480 v – 3 phases

Année: 2004

HOMAG MODEL ISL 011/021 Roll Feed Gang Rip Saw

•	Flexible through-feed Saw used to divide large laminated panels into individual planks ready for subsequent operations (T&G, End Match, etc.) Process Parameters
•	Infeed Material, large laminated boards
•	Max. length 2500 mm (8′)
•	Max. width 1830 mm (6′)
•	Panel thickness, typical is 7 – 8 mm (1/4”-5/16”)
•	Processed Workpieces, cutting up to six (6) planks out of one (1) infeed panel
•	Cutting length 610 – 2500 mm (2′ – 8′)
•	Cutting width 198 – 400 mm (8″ – 16″) Machine Base
•	Machine frame prepared for the installation of hogging and sawing units, low vibration/stable welded framework, centralized dust extraction directly from the hogging and sawing units
•	Noise protection hood covers the complete machine with a compact/user-friendly design, moveable saw units cut from below
•	Operating controls mounted on the right Workpiece Transport
•	(4) Pair of driven rollers from above and below
•	Manual feed speed adjustment
•	Manual height adjustment of top pressure rollers Technical Specifications
•	Workpiece thickness: 6 to 40 mm (1/4″ to 1-9/16″)
•	Working width: 2100 mm (82-11/16″)
•	Working height: 1100 mm (43-5/16″)
•	Min. length of raw material, 900 mm (35-1/2″)
•	Min. strip width: 198 mm (7-7/8″)
•	Feed speed 15 to 60 m/Min (50 to 196 FPM)
•	Operating voltage: 460 V, 60 Hz, 3-Ph
•	Control voltage: 115 V, 60 Hz, 24 V Controls:
•	Switch cabinet integrated into machine frame, electrical controls and switching elements integrated into the electrical cabinet
•	Electrical equipment installed according to UL specifications. Voltage supplied must not fluctuate in excess of +/- 5% of its stated value. Equipped with:
•	(5) Sawing Units, 4.5 kW ISE unit# 1350, 6000 RPM angular type gear box, ratio = 1 : 2, support, suction hood, counter-cut device, width 196 mm
•	(2) Hogger Units, 7.5 kW ISE unit# 1365, 6000 RPM angular type gear box, ratio = 1 : 2, support, suction hood, counter-cut device width 196 mm